LED Flexible Double Indoor Strip Tape 12V DC
$115.00 – $480.00
12V 120 SMDs LED Tape Flexible Strip Lighting
Cuttable every 1 in. (25mm)
Ultra thin, with double-sided 3M tape for quick install, draws 2.9W/ft and emits 290 lumens per foot. Available in 16.5 foot or 82 foot rolls, translating into 120 SMDs per 3.28 feet this strip light comes in 3000K warm light and 5500K cool light. Ideally suited for cove, display and back bar lighting setting a required mood.
Fully dimmable using line voltage dimmable LED drivers or low voltage PWM LED dimmers and aluminium profiles (Please see our Accessories Page)
Display LED lighting
Back bar lighting
Ultra thin flexible LED strip Tape lights
Cut lines every 3 LEDs
Double-sided 3M tape
Simple to install
+50,000 hour lifespan, with 3 Year Warranty
LEDs can be cut every 3 LEDs at the marked locations and re-connected together by soldering or using solderless easy snap connects.
Solderless connectors make it easy to connect strips together after cutting, found on our accessories page.
Requires LED 12V DC Driver (click here )
||500 × .8 × .2 cm
12V DC (Constant Voltage)
9.6W per Meter
|Degree of light spread
|Number of LEDS
120 per 1M (3.28FT)
Warm White 3000K, Cool White 5500K
290 lumens per foot
L197 x W0.3 x L0.08 in., L5000 x W8 x H2 mm.
|LED Strip Length
16.5 ft., 82.5 ft.
Surface or Recess mount
Request more information
Require more information? Please fill out the request form:
Frequently asked Questions:
Q: How do I cut strips to custom sizes?
A: A cut mark is indicated every three LEDs. Use scissors or wire strippers to cut along the indicated line
Q: Can I chain cut sections?
A: Solder points are located at the edge of each cut section. Two strips can be soldered together by removing the 3M tape from the back of one and placing the solder points over the top of the other strip’s solder points. Wire can be attached to link two strips the same way