15W LED Driver – Indoor
LED Power supply
15 Watt indoor power supply this is also called an LED driver,
stocked in California, comes with a plug, but can also be hard-wired on the line and voltage sides.
Short circuit and overload protection
Indoor use only
6-foot long wire with plug
5″ lead wire on the voltage side
can be hard wired on both the line and voltage side.
Protection: Class 2
Used with Reliabrite 12V DC Products, including:
Flexible strip lighting
||11.1 × 4.6 × 2 cm
|Wire Lead Length
Plug input 6 ft (1.83 M) wire, Output 6 inch (15.24 cm) wire
L111 x W46 x H20 mm., L4.37 x W1.81 x H0.79 in.
Hard wired or Surface
Request more information
Require more information? Please fill out the request form:
Download PDF product sheet:
15W Indoor Power Supply
Frequently asked Questions:
Q: How much LED strip can I put on a 15W Driver?
A: Calculate the Watts per Ft or Metre by the length you want to run. For example: 3M of a flexible LED tape rated at 4.8W/M will require 14.4W to drive it. In this case, a 15W Driver will work fine. *Do not go over the required watts to drive the strip
Q: Can I hardwire the driver?
A: Yes. These drivers are created to work in both surface mount and hardwiring applications