Flexible Outdoor LED Strip Light

$130.00

Clear

Waterproof Outdoor Slim 12V LED Strip Lighting

This outdoor flexible strip lighting is fully waterproof as are the easy to use connectors.
Stocked in 16.5 ft spools 18 SMD LEDs per foot, which can be cut every 3 LED’s. This LED strip light is very versatile available in 3000k warm light and 5500k whiter light. Drawing only 1.4 watts per foot at 12V DC,produces 145 lumen’s, wet rated IP-67, Easy to install with the mounting clips provided, UL listed and CE approved, fully dimmable using either a 12V DC dimmer or a dimmable driver.

Applications:

Deck and Soffit
Mood lighting
Outdoor lighting
Back bar lighting
also Ideal for any Indoor area that is wet or damp.
like showers, pool areas and basements.

Features:

Fully Waterproof silicone covering
Slim design
Mounting clips included
Easy to install
Waterproof connectors
Long lasting +50,000 hour lifespan
Bright and efficient
3000K or 5500K
3 Year Warranty

LEDs can be cut every 3 LEDs at the marked locations and re-connected together

2 waterproof connections included, one on each end of strip to allow for easy connection to add length

Requires LED 12V DC Driver (sold separately)
C US UL ®

Includes:

Extra waterproof connectors (2), end caps (4) and mounting clips (7) with screws (14)

Product Specifications

Voltage

12V DC (Constant Voltage)

Wattage

1.50 Watts per Foot

Degree of light spread

140º

Number of LEDS

18 per foot

Color Temperature

Cool White 5500K, Warm White 3000K

Lumen output

145W per foot

Dimmable

Yes

Dimensions

16.6 feet Long x .40 inches Wide x .15 Inches Thick

Housing

Waterproof Silicone Covering

Warranty

3 Year

Request more information

Require more information? Please fill out the request form:

Download PDF Product Sheet

Frequently asked Questions:

Q: How do I cut strips to custom sizes?

A: A cut mark is indicated every three LEDs. Use scissors or wire strippers to cut along the indicated line

Q: Can I chain cut sections?

A: Solder points are located at the edge of each cut section. Two strips can be soldered together by removing the 3M tape from the back of one and placing the solder points over the top of the other strip’s solder points. Wire can be attached to link two strips the same way