Flexible LED Strip 5050 High Output Indoor Light Tape


12V Fexible High Output LED Tape 5050

Flexible strip lighting cuttable with 3M two-sided tape.
This thin flexible LED tape has double-sided 3M tape draws only 3.50 watts per foot and emits 265 lumens, this is a super bright LED tape ideal for so many different projects, the 5050 LED tape is cuttable every 3 LED’s comes in 16.5-foot spools translating into 18 SMD’s per foot this strip light comes in 3000K warm light and 5500K whiter light, ideally suited for cove, display and back bar lighting setting a required mood.
Fully dimmable using either a line voltage (110) dimmable driver with a Lutron Diva dimmer or dimmable with a 12V DC dimmer that can be found on our accessories page. Stocked and shipped from Northern California. When the LED tape is visible try using our aluminium profilesOur 5050 LED Tape can be paired with our inline dimmers. For a sleek, modern, elegant, simple, and low-cost lighting alternative.


Home or Office Cove lighting
Mood lighting
Display lighting
Back bar lighting


Thin flexible LED strip lights
Double-sided quality 3M tape on the back for easy installation
Triple chip SMD LED technology
11.5W / per Meter (57.5 watts per roll)
Simple to install
+50,000 hour lifespan

LEDs can be cut every 3 LEDs (2.44in / 62mm) at the marked locations and re-connected together using solderless LED connectors.

Solderless connectors make it easy to connect strips together after cutting

Requires an LED 12V DC Driver (power supply, sold separately, see accessories page)
UL listed


3M tape on the back for quick installation, 16.5 ft roll of super bright LED strip, wire lead on 1 side

Product Specifications

Weight .5 kg

12V DC (Constant Voltage)


11.5 Watts/M, 3.5 Watts/ft (57.5 Watts/roll)

Number of LEDS

48 SMDs/M (Total of 240)

Color Temperature

Warm White 3000K, Cool White 5500K



Lumen Output

1180 lm/M, 360 lm/ft

LED Strip Length

16.5 ft. (5M)


L197 x W0.4 x L0.08 in., L5000x W10 x H2 mm.


3M tape for surface mount or recess installation




3 years

Request more information

Require more information? Please fill out the request form:

Download PDF product sheet:


Frequently asked Questions:

Q: How do I cut strips to custom sizes?

A: A cut mark is indicated every three LEDs. Use scissors or wire strippers to cut along the indicated line

Q: Can I chain cut sections?

A: Solder points are located at the edge of each cut section. Two strips can be soldered together by removing the 3M tape from the back of one and placing the solder points over the top of the other strip’s solder points. Wire can be attached to link two strips the same way