Dim to Warm Flexible Tape


Dim to Warm LED Flexible Strip Lighting

Ideally suited for display, accent, and mood lighting. Fully dimmable.

Ultra thin has double sided 3M tape for quick install, draws 5.5W/ft and emits 550 lumens per foot. Available in 16.4 foot spools translating into 224 – 2016 chips per Meter this strip light dims from 3000K Warm white to 1800K Warm white.


Under cabinet lighting
Display lighting
Accent lighting
Mood lighting


224 PCS of 2016 Chip LEDs
Dims from 3000K to 1800K
Cut lines every 14 LEDs, for easy to cut on site
Double sided 3M tape
Simple to install
+50,000 hour lifespan, with 3 Year Warranty

LEDs can be cut every 14 LEDs at the marked locations and re-connected together by soldering or using solderless easy snap connects.

Solderless connectors make it easy to connect strips together after cutting, found on our accessories page.

Requires LED 24V DC Driver

Product Specifications


24V DC


18 Watts/M, 5.5 Watts/ft.

Number of LEDS

224 – 2016 Chips/M

Color Temperature

3000K Warm White dims to 1800K Warm White

Lumen Output

1800 lm/M, 550 lm/ft.

LED Strip Length

16.5 ft. (5M)




3 years

Request more information

Require more information? Please fill out the request form:

Download PDF product sheet:

Dim to Warm Flexible Strip

Frequently asked Questions:

Q: How do I cut strips to custom sizes?

A: A cut mark is indicated every three LEDs. Use scissors or wire strippers to cut along the indicated line

Q: Can I chain cut sections?

A: Solder points are located at the edge of each cut section. Two strips can be soldered together by removing the 3M tape from the back of one and placing the solder points over the top of the other strip’s solder points. Wire can be attached to link two strips the same way