LED Flexible Double Indoor Strip Tape 12V DC

$115.00$480.00

12V 120 SMDs LED Tape Flexible Strip Lighting

Cuttable every 1 in. (25mm)

Ultra thin, with double-sided 3M tape for quick install, draws 2.9W/ft and emits 290 lumens per foot. Available in 16.5 foot or 82 foot rolls, translating into 120 SMDs per 3.28 feet this strip light comes in 3000K warm light and 5500K cool light. Ideally suited for cove, display and back bar lighting setting a required mood.
Fully dimmable using line voltage dimmable LED drivers or low voltage PWM LED dimmers and aluminium profiles (Please see our Accessories Page)

Applications:

Cove lighting
Accent lighting
Display LED lighting
Back bar lighting
Cabinet lighting

Features:

Ultra thin flexible LED strip Tape lights
Cut lines every 3 LEDs
Double-sided 3M tape
Simple to install
+50,000 hour lifespan, with 3 Year Warranty

LEDs can be cut every 3 LEDs at the marked locations and re-connected together by soldering or using solderless easy snap connects.

Solderless connectors make it easy to connect strips together after cutting, found on our accessories page.

Requires LED 12V DC Driver (click here )
cULus®

Product Specifications

Weight .5 kg
Dimensions 500 × .8 × .2 cm
Voltage

12V DC (Constant Voltage)

Wattage

9.6W per Meter

Degree of light spread

140º

Number of LEDS

120 per 1M (3.28FT)

Color Temperature

Warm White 3000K, Cool White 5500K

Lumen output

290 lumens per foot

Dimmable

Yes

Dimensions

L197 x W0.3 x L0.08 in., L5000 x W8 x H2 mm.

LED Strip Length

16.5 ft., 82.5 ft.

Install

Surface or Recess mount

Warranty

3 Year

Request more information

Require more information? Please fill out the request form:

Download PDF product sheet:

Indoor Double 3528 Flexible Strip

Frequently asked Questions:

Q: How do I cut strips to custom sizes?

A: A cut mark is indicated every three LEDs. Use scissors or wire strippers to cut along the indicated line

Q: Can I chain cut sections?

A: Solder points are located at the edge of each cut section. Two strips can be soldered together by removing the 3M tape from the back of one and placing the solder points over the top of the other strip’s solder points. Wire can be attached to link two strips the same way