30W 12V DC LED Driver – Indoor
30 Watt UL listed LED Power Supply
Class rated, UL certified for indoor use with 12 Volt DC LED lights.
This 30 Watt LED Power Supply is stocked in California and is also known as an LED Driver, it includes a plug but can also be hardwired on the line voltage side and 12V DC side. At 12 Volt DC, 2.5 Amps it can handle a 30 Watt load.
Used with 12V DC Products including LED strip lighting, LED pucks, Thin panels and step lighting used for:
Short circuit and overload protection
cULus listed, certified for use in the USA
Indoor use only
Protection: Class 2 rated
||11.1 × 4.6 × 2 cm
30 Watts Max
L111 x W46 x H20 mm., L4.37 x W1.81 x H0.79 in.
|Wire Lead Length
Plug input with 5 ft wire, Output 6 inch (15.24 cm) wire
Hardwire or use included 120V North American Plug
Request more information
Require more information? Please fill out the request form:
Frequently asked Questions:
Q: How much LED strip can I put on a 15W Driver?
A: Calculate the Watts per Ft or Metre by the length you want to run. For example: 3M of a flexible LED tape rated at 4.8W/M will require 14.4W to drive it. In this case, a 15W Driver will work fine. *Do not go over the required watts to drive the strip
Q: Can I hardwire the driver?
A: Yes. These drivers are created to work in both surface mount and hardwiring applications